Thanks for looking. Please feel free to continue searching or browse other sections of our site. If would like further assistance with your search feel free to contact us at [email protected].

    Low Temperature, High Capabilities

    LST I Plus Radiators from Stelrad are the online exclusive Low Surface Temperature Radiator range you have been waiting for. All fully equipped with an inbuilt arthritic adapter, this range is specifically designed for environments with special requirements. Supplied with remote sensing thermostatic valves, the temperature of these appliances is extremely accurate, and the maximum temperature can never be exceeded. LST I Plus Stelrad Radiators also come with a Danfoss RAS-D Remote Sensor, which is specifically designed for commercial heating systems. This can be pre-set to allow adjustment of room temperatures between the incredibly low range of 5 – 26 Degrees Celsius.

    LST I Plus Radiators are capable of reaching a maximum surface temperature of 43°C, which is relatively low when compared against the surface temperature of other radiators available.

    The low surface temperature of the Stelrad LST I Plus is thanks to its insulative outer casing, remaining cool to touch at high temperatures, meaning it is suitable for all spaces that are more likely to have people coming into contact with them. The casing of LST I Plus Stelrad Radiators is secured tightly to the emitter itself, with extra protected locking capabilities. LST I Plus Stelrad Radiators all come fully equipped with an extra secure TRV and lock shield valve, which is easily removed with a 4mm Allen Key, that every Stelrad LST I Plus is provided with. The benefit of this is to help you install the front of the casing to the frame and to remove the fascia panel for access to the LST I Plus Radiator emitter. Additionally, the casing on the Stelrad LST I Plus can be turned around so that the control dial is on the opposite side, allowing you to position your LST I Plus Radiator how you would like it. LST I Plus Radiators all come fitted out with internal copper piping, pre-piped for your benefit. If you need to re-pipe them at any point, they can be piped at the bottom from the floor or piped from the side as there is a knockout indentation indicated. All LST I Plus Stelrad Radiators meet the NHS Guidance for ‘safe hot water and surface temperature’, as well as possessing an antibacterial paint finish for additional protection.

    Our Reviews
    What Our Customers Say